Viva Azure Strip Wax Microwave To Pot

VIVA AZURE SHIMMER STRIP WAX

Choose Viva Azure Shimmer if you’re after a versatile, affordable wax for both male & female clients.

Microwave to pot technology.

Viva Azure is the ideal wax for removing coarse and stubborn hair. It contains Mica and Azulene to soothe and calm the skin & assist in rapid recovery.

Heating Instructions:

To melt/soften the wax either

1. Remove the lid and insert jar directly into an appropriate professional wax heater on a medium setting.
2. Remove lid from jar and place off centre in microwave for a minimum of 2 minutes, but no longer than 4 minutes depending on the wattage of your microwave and the amount of wax remaining in the jar.
3. Once wax has softened, place jar directly into a wax heater. Regulate heater to a medium setting of approximately 65°C-75°C (149°F-167°F), between dial 3-4 on a Caronlab Professional Wax Heater. 

Usage Instructions:

1. Area to be treated must be clean, dry and free from any oils and creams. Use Caronlab Pre Wax Skin Cleanser. Always test wax on the inside of your wrist before use. Do not apply on warts, moles and broken or irritated skin.
2. Apply wax thinly in the same direction as hair growth.
3. Place strip over the wax and press firmly.
4. Hold skin taut with one hand and pull strip off in the opposite direction.
5. For the perfect finish and to remove any wax residue on the skin, we recommend you use Caronlab After Wax Skin Cleanser or After Wax Soothing Lotion. To clean equipment use Caronlab Wax Remover Citrus Clean. 

*Don’t try this with other brands’ pots, they will melt in the wax heater.