VAGHEGGI FUOCO DIORITI STONE & CAST – SCULPTING HEATING POWDER 220G X 5
SELF-HEATING | SCULPTING | PROFESSIONAL BODY TREATMENT
Bring an innovative thermoactive element to professional body treatments with Vagheggi Fuoco Dioriti Stone & Cast, a sculpting heating powder combining volcanic-derived minerals to create spontaneous heat when activated with water and worked by hand.
Developed exclusively for professional use, Dioriti Stone & Cast is designed to complement targeted body protocols addressing the appearance of cellulite, localised fatty deposits and loss of tone. Once activated, the powder generates natural heat for at least 15 minutes without requiring an external heat source, creating a distinctive thermoactive treatment experience.
The versatile formula allows therapists to perform two different professional applications – Stone or Cast. When prepared using the Stone method, the powder is shaped into solidifying diorite hemispheres that retain and release heat and can be incorporated into the professional Dioriti Massage and Intensive Mud Protocol. For the Cast method, the powder is prepared to a more fluid consistency and applied over treatment leggings as part of the Reducing and Shaping Wrap Protocol.
Featuring a mineral-rich combination including sea silt, pumice and volcanic components, the treatment brings together thermoactive and remineralising properties characteristic of the Vagheggi Fuoco professional body range.
Supplied as 5 x 220g single-dose sachets, each portion is pre-measured for a complete professional treatment, helping salons and spas achieve consistent preparation, controlled product usage and a repeatable treatment experience.
WHY BEAUTY THERAPISTS CHOOSE DIORITI STONE & CAST
1. Spontaneous Self-Heating Action
Activates when prepared with water and worked by hand, releasing natural heat for at least 15 minutes without requiring an external heat source.
2. Two Professional Treatment Methods
One product can be prepared as either Stone for thermoactive diorite massage techniques or Cast for professional reducing and shaping wrap protocols.
3. Targets Body Imperfections
Designed for professional protocols addressing the appearance of cellulite, localised fatty deposits and loss of tone.
4. Volcanic Mineral Experience
Incorporates mineral-rich ingredients including sea silt and pumice to provide the distinctive thermoactive and remineralising character of the Fuoco range.
5. Five Pre-Measured Professional Treatments
Contains five individual 220g sachets for convenient, consistent dosing and professional treatment preparation.
KEY ACTIVE INGREDIENTS
- Maris Limus Extract (Sea Silt) – Remineralising; contributes to the thermoactive mineral base
- Pumice – Volcanic mineral component supporting the Fuoco thermoactive treatment experience
PROFESSIONAL USE – STONE METHOD
Pour one sachet into a suitable treatment bowl. Add 90ml of room-temperature water in a single motion using the appropriate dispenser.
Work quickly with the hands until a smooth paste forms. Divide into two equal portions and shape each into a hemisphere.
Position one diorite at the lumbosacral area and the second at the cervical area. The diorites will solidify and naturally release heat for at least 15 minutes.
Apply 20ml of Vagheggi Body Massage Oil Dry Touch and perform the prescribed body massage using the diorites to support the treatment technique.
Remove any remaining volcanic powder with dampened towels.
PROFESSIONAL USE – CAST METHOD
Have the client wear the appropriate treatment leggings.
Pour one sachet into a suitable bowl and add 165ml of warm water. Wearing gloves, mix until a smooth, fluid consistency is achieved.
Pour over two targeted body areas and distribute evenly by hand. Wrap with plastic film and leave in place for 20 minutes.
At the end of the treatment time, cut and remove the leggings, then remove any remaining product with water-dampened mitts.
For professional use only. Dermatologically tested. Nickel tested.