page
Pro Tips › Nails

Why Shellac and Gel Polish Wrinkle:
What Depth of Cure Means

  • Wrinkling
  • Depth of Cure
  • Thin Coats
  • Lamps

Gel polish wrinkles when the surface of a coat cures before the material underneath it. The top sets into a skin while the layer below is still soft, and as the lower layer cures and moves, the skin buckles into ridges. It happens most with thick coats, highly pigmented or opaque shades, product pooled at the cuticle or sidewalls, and a lamp that does not suit the product or is not reaching the whole nail. Depth of cure is how far the light reaches into the coat with enough energy to cure it. To prevent wrinkling, apply thin coats, keep product off the skin and out of the sidewalls, cap the free edge, use the lamp the system is made for, place the hand correctly, and follow the manufacturer's cure times.

Wrinkled colour is one of the most familiar problems at the nail desk. The coat looks smooth going into the lamp and comes out rippled, usually at the cuticle or along the sidewalls, and usually in a deep or opaque shade. It is tempting to blame the bottle. Most of the time, it is the cure.

This article explains what is happening when gel polish wrinkles, why some shades and coats are more prone to it, and what to change. It follows on from what is visible light curing, which covers how wavelength and opacity interact.

What wrinkling actually is

Gel polish cures when photoinitiators in the product absorb light and start a reaction that links the liquid into a solid. Light enters from the top of the coat, so the top is where the reaction starts and where it has the most energy to work with.

In a thin coat, light reaches the bottom quickly and the whole layer cures together. In a thick coat, the top can cure into a firm skin while the material below is still liquid or soft. As the lower layer cures, it shrinks and shifts slightly. The skin on top cannot stretch to follow it, so it folds. Those folds are the wrinkles.

Wrinkling is a sign, not just a finish fault

A wrinkled coat usually has uncured or under-cured product underneath it. That is the same weakness behind lifting and peeling, covered in why gel polish lifts and peels. Topping over a wrinkle hides it but does not fix it.

What depth of cure means

Depth of cure is how far into a coat the light reaches with enough energy to cure it. Everything in the coat that absorbs or scatters light takes some of that energy before it gets to the bottom.

Thickness

How much product

The thicker the coat, the further the light has to travel and the less reaches the bottom. Two thin coats cure more evenly than one thick one.

Pigment

How opaque the shade is

Pigments absorb and scatter light. Deep, dark, highly opaque and some metallic or glitter shades leave less light for the bottom of the coat.

Light

What the lamp delivers

The wavelength has to match the product's photoinitiators, and enough of it has to reach every part of the nail for long enough.

That is why the same technique can give a perfect cure in a sheer pink and a wrinkled one in a deep red. The red takes more of the light near the surface, and less is left for the layer underneath.

The usual causes at the desk

Cause Why it wrinkles What to change
Coat too thick Light cannot cure the bottom before the top sets Thin coats, and build colour in layers
Pooling Product gathers at the cuticle and sidewalls, so those spots are thicker than the rest Wipe excess from the brush, and float the product to the edges rather than flooding them
Deep or opaque shade Pigment uses up light near the surface Thinner coats than you would use for a sheer shade
Wrong lamp for the system The light does not match the product's photoinitiators Use the lamp the manufacturer specifies for the system
Hand placement Nails at the edges, or thumbs tilted, get less light Flat hand, centred, and cure thumbs on their own and flat
Cure time cut short Not enough energy reaches the bottom of the coat Follow the manufacturer's cure time for each step
Lamp in poor condition Dirty, damaged or failing diodes deliver less light Keep the lamp clean and check it against the manufacturer's guidance

More than one of these is often at work at once. A deep shade, applied a little heavily, on a thumb tilted toward the edge of the lamp, is the classic wrinkled nail.

How to stop gel polish wrinkling

  • Apply thin coats. If a shade needs more coverage, add another thin coat rather than a thicker one.
  • Wipe the brush. Take excess off both sides before it goes on the nail.
  • Keep a margin. Stop just short of the cuticle and sidewalls so product cannot pool against the skin.
  • Cap the free edge on each coat, so it is sealed and evenly thin at the tip.
  • Use the system's own lamp. Light-cured products are made to cure under particular wavelengths. The manufacturer's instructions name the lamp to use.
  • Place the hand properly. Flat and centred, with thumbs cured separately and laid flat.
  • Follow the cure times. Each step has its own time. Do not shorten them to keep to schedule.
  • Prep well. A clean, dehydrated nail plate and the right base give the colour a sound foundation. Salon First stocks base, top and prep and preps and primers.

Already wrinkled?

Remove the affected colour and reapply it thinner. Curing again on top of a wrinkle can firm the surface, but the ridges stay, and the coat underneath may still not be fully cured.

Shellac and the lamp

CND Shellac is a light-cured gel-polish system, and the same principles apply to it: thin coats, no pooling, the lamp the system is made for and the cure times in CND's instructions. What is the difference between gel polish and Shellac covers how the two compare.

Depth of cure is also the problem CND says it designed its new lamp around. CND states that the CND Visible Light Lamp improves curing of highly opaque light-cured nail coatings, improves depth of cure on high viscosity coatings, and reduces wrinkling of CND Shellac shades. Those are CND's statements about its own lamp. How it works is covered in what is visible light curing, and what it changes day to day in cordless curing.

For lamps in general, including why a lamp needs to suit the product, see UV vs LED nail lamps.

Cure it all the way through

Gel polish wrinkles when the top of a coat cures before the bottom, and the soft layer underneath moves the skin on top. Thick coats, pooled product, deep or opaque shades, the wrong lamp, poor hand placement and short cure times all make it more likely. Thin coats, a clean margin, a capped free edge, the system's own lamp, a flat centred hand and the manufacturer's cure times prevent most of it. A wrinkled coat should come off, not be topped over.

Frequently asked questions

Why does my gel polish wrinkle under the lamp?

The surface has cured before the product underneath it. The top forms a skin while the lower layer is still soft, and as the lower layer cures and moves, the skin folds. Thick coats, pooling at the cuticle or sidewalls, opaque shades and the wrong lamp are the usual causes.

Why does Shellac wrinkle?

For the same reasons as other gel polish: a coat that is too thick, product pooled against the skin, a deep or opaque shade, or a lamp, hand position or cure time that does not deliver enough light to the bottom of the coat. Follow CND's application and curing instructions.

What does depth of cure mean?

It is how far into a coat the light reaches with enough energy to cure it. Thickness, pigment and the light from the lamp all affect it. When depth of cure falls short, the bottom of the coat stays soft.

Why do dark gel colours wrinkle more?

Dark and highly opaque shades contain more pigment, which absorbs and scatters light near the surface. Less light reaches the bottom of the coat, so it is more likely to cure on top first. Apply these shades in thinner coats.

Can I fix wrinkled gel polish by curing it again?

Curing again can firm the surface, but it does not remove the ridges, and the coat underneath may still be under-cured. Remove the wrinkled colour and reapply it in thin coats.

Does the lamp affect gel polish wrinkling?

Yes. The lamp's light has to suit the product's photoinitiators and reach every nail for the full cure time. Using a lamp that does not match the system, placing the hand off-centre or tilting the thumbs all reduce the light that reaches the coat.

Trade Account

Colour, lamps and prep for a full cure

Salon First stocks the CND range, including Shellac, along with gel colour and gel lights and accessories, with wholesale pricing for registered salon professionals.

Shop CND Shop Gel Lights

Written by: Jeanette McConville

with over 27 years of industry experience, she is the General Manager at Salon First , one of Australia’s leading professional hair and beauty wholesalers. With extensive experience across the beauty industry, Jeanette brings a deep understanding of industry trends, supplier relationships, and the evolving needs of salon professionals. She is passionate about supporting salon success through strong partnerships, innovative product offerings, and practical business insights. Jeanette regularly shares her expertise on topics ranging from product innovation to operational excellence within the hair and beauty industry.


Trade & wholesale enquiries

Salon First is a trade-only supplier based in Melbourne, shipping professional beauty supplies to salons, spas, lash studios, nail technicians and mobile therapists Australia-wide.

Express dispatch is available for urgent restocks, and local customers can Click & Collect from our showroom.

Open your free trade account or contact our team.

Phone1300 725 661 Emailinfo@salonfirst.com.au Showroom54 Brindley Street, Dandenong South VIC 3175 New accountsFree to open, same-day approval